Section 1 Identification |
Product Number: | C1612 |
Health: | 1 |
Flammability | 0 |
Reactivity | 0 |
Hazard Rating:
Least | Slight | Moderate | High | Extreme |
0 | 1 | 2 | 3 | 4 |
NA = Not Applicable NE = Not Established
|
|
Product Name: | Copper Turnings Light |
Trade/Chemical Synonyms | |
Formula: | Cu |
RTECS: | GL5325000 |
C.A.S | CAS# 7440-50-8 |
Section 2 Component Mixture |
Sara 313 | Component | CAS Number | % | Dim | Exposure Limits: |
|
Copper Turnings Light | CAS# 7440-50-8 | 100% | W/W | OSHA TWA 1 mg (Cu)/mƒ (dust, mist) |
|
Section 3 Hazard Identification (Also
see section 11) |
Generally
not hazardous in normal handling, however good laboratory practices
should always be used. Avoid long term exposure to skin or by
inhalation. |
Section 4 First Aid Measures |
Generally
not hazardous in normal handling, however good laboratory practices
should always be used. Avoid long term exposure to skin or by
inhalation.
FIRST AID: SKIN: Wash exposed area with soap and water. If irritation persists, seek medical attention.
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting
lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air.
If not breathing, give artificial respiration. If breathing is
difficult, give oxygen
INGESTION: Give several glasses of milk or water. Vomiting may occur
spontaneously, but it is not necessary to induce. Never give anything
by mouth to an unconscious person. |
Section 5 Fire Fighting Measures |
Fire Extinguisher Type: | Any means suitable for extinguishing surrounding fire |
Fire/Explosion Hazards: | None Known. |
Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
|
|
Section 6 Accidental Release
Measures |
Sweep up and place in suitable (fiberboard) containers for reclamation or later disposal.
|
Section 7 Handling and
Storage |
Store in a cool dry place. This Material is not considered hazardous. Handle using safe laboratory practices. |
Section 8 Exposure Controls
& Personal Protection |
Respiratory Protection:None required
Other Protective Equipment:
Wear appropriate clothing to prevent skin exposure
|
Section 9 Physical and Chemical Properties |
Melting Point: | 1083 Deg. C | Specific Gravity | 8.94
|
Boiling Point: | 2595 Deg. C |
Percent Volatile by Volume: | N/A |
Vapor Pressure: | N/A |
Evaporation Rate: | N/A |
Vapor Density: |
N/A |
Evaporation Standard: |
|
Solubility in Water: |
Insoluble |
Auto ignition Temperature: |
Not applicable |
Appearance and Odor: |
Reddish lusterous metal |
Lower Flamm. Limit in Air: |
Not applicable |
Flash Point: |
N/A |
Upper Flamm. Limit in Air: |
Not applicable |
|
Section 10 Stability and Reactivity Information |
Stability: Stable | Conditions to Avoid: Avoid contact with incompatible materials. |
Materials to Avoid: Acetylene, magnesium metal (as copper dust) |
Hazardous Decomposition Products: None |
Hazardous Polymerization:Will Not Occur |
Condition to Avoid:None known |
|
Section 11
Additional Information |
Can
irritate eyes, mucous membranes, and pharynx. Can cause nausea, ulcer
perforation, metal taste and dermatitis. Conditions aggravated/target
organs: Persons with pre-existing eye, skin, or respiratory conditions
may be more susceptible |
DOT Classification: Not Regulated |
DOT regulations may change from time to time. Please
consult the most recent version of the relevant regulations.
Revision No:0 | Date Entered: 9/1/2006 |
Approved by: WPF |
|
|
|