LOCTITE CORP AUTOMOTIVE AND CONSUMER GROUP -- LOCTITIE REAR VIEW MIRROR ADHESIVE (TWO-PAR -- 2540-01D003136
===================== Product Identification ===================== Product ID:LOCTITIE REAR VIEW MIRROR ADHESIVE (TWO-PAR MSDS Date:07/08/1993 FSC:2540 NIIN:01D003136 === Responsible Party === Company Name:LOCTITE CORP AUTOMOTIVE AND CONSUMER GROUP Address:4450 CRANWOOD COURT City:CLEVELAND State:OH ZIP:44128-4004 Country:US Info Phone Num:216-663-3011 Emergency Phone Num:216-663-3011 Preparer's Name:JEAN TOBBE CAGE:08028 === Contractor Identification === Company Name:LOCTITE CORP AUTOMOTIVE AND CONSUMER GROUP Address:4450 CRANWOOD COURT Box:City:CLEVELAND State:OH ZIP:44128-4004 Country:US Phone:216-663-3011 CAGE:08028 ============= Composition/Information on Ingredients ============= Ingred Name:POLYURETHANE METHACRYLATE RESIN Fraction by Wt: 50-55% Other REC Limits:NONE RECOMMENDED Ingred Name:HYDROXYALKYLMETHACRYLATE CAS:868-77-9 Fraction by Wt: 35-40% Other REC Limits:NONE RECOMMENDED Ingred Name:ACRYLIC ACID (SARA III) CAS:79-10-7 RTECS #:AS4375000 Fraction by Wt: 5-10% Other REC Limits:NONE RECOMMENDED OSHA PEL:S, 10 PPM ACGIH TLV:S, 2 PPM; 9293 EPA Rpt Qty:5000 LBS DOT Rpt Qty:5000 LBS Ingred Name:1-METHYL-1-PHENYLETHYL HYDROPEROXIDE (CUMENE HYDROPEROXIDE) (SARA III) CAS:80-15-9 RTECS #:MX2450000 Fraction by Wt: 2-3% Other REC Limits:NONE RECOMMENDED EPA Rpt Qty:10 LBS DOT Rpt Qty:10 LBS Ingred Name:TRIBUTYLAMINE CAS:102-82-9 RTECS #:YA0350000 Fraction by Wt: 0.1-1% Other REC Limits:NONE RECOMMENDED Ingred Name:2-PROPENOIC ACID CAS:2530-85-0 RTECS #:UC0230000 Fraction by Wt: 0.1-1% Other REC Limits:NONE RECOMMENDED ===================== Hazards Identification ===================== LD50 LC50 Mixture:ORAL LD50 (RAT) IS >5000 MG/KG Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER. Explanation of Carcinogenicity:NOT CARCINOGENIC. Effects of Overexposure:MAY CAUSE DERMATITIS ON PROLONGED CONTACT IN SENSITIVE INDIVIDUALS. Medical Cond Aggravated by Exposure:NONE ESTABLISHED. ======================= First Aid Measures ======================= First Aid:INGESTION-DO NOT INDUCE VOMITING. CALL PHYSICIAN. INHALATION-REMOVE TO FRESH AIR. CALL PHYSICIAN. SKIN CONTACT-FLUSH WITH WATER FOR AT LEAST 15 MINUTES. EYE CONTACT-FLUSH AT LEAST 15 MINUTES WITH WATE R. OBTAIN MEDICAL ATTENTION. ===================== Fire Fighting Measures ===================== Flash Point Method:TCC Flash Point:>200F,>93C Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL. Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER. Unusual Fire/Explosion Hazard:NONE KNOWN. ================== Accidental Release Measures ================== Spill Release Procedures:SOAK UP IN AN INERT ABSORBENT. STORE IN PARTLY FILLED, CLOSED CONTAINER UNTIL DISPOSAL. ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE BELOW 110 DEG F TO PRESERVE SHELF-LIFE. Other Precautions:AVOID PROLONGED SKIN CONTACT. KEEP AWAY FROM EYES. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NONE SPECIFIED BY MANUFACTURER. Ventilation:PROVIDE ADEQUATE VENTILATION TO MAINTAIN VAPOR CONCENTRATIONS BELOW TLV. Protective Gloves:WEAR RUBBER OR PLASTIC GLOVES. Eye Protection:WEAR SAFETY GLASSES OR GOGGLES. Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER. Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health PART "B" OF A TWO PART KIT. ================== Physical/Chemical Properties ================== HCC:N1 Boiling Pt:B.P. Text:>300F,>149C Vapor Pres:<10 MM Spec Gravity:1.08 Solubility in Water:SLIGHT Appearance and Odor:YELLOWISH LIQUID, SHARP, IRRITATING ODOR. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES MAY ATTACK SOME THERMOPLASTICS. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:TOXIC CHLORIDES. ==================== Disposal Considerations ==================== Waste Disposal Methods:BURY OR INCINERATE IN ACCORDANCE WITH EPA AND LOCAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.