RED DEVIL INC -- 100% INDUSTRIAL GRADE RTV SILICONE SEALANT, 081601  -- 8030-00N054142
<pre>=====================  Product Identification  =====================

Product ID:100% INDUSTRIAL GRADE RTV SILICONE SEALANT, 081601
MSDS Date:02/02/1995
FSC:8030
NIIN:00N054142
=== Responsible Party ===
Company Name:RED DEVIL INC
Address:ONE WEBB ST
City:PRYOR
State:OK
ZIP:74361
Country:US
Info Phone Num:918-825-5744
Emergency Phone Num:918-825-5744
CAGE:23577
=== Contractor Identification ===
Company Name:RED DEVIL, INCORPORATED
Address:ONE WEBB STREET
Box:A
City:PRYOR
State:OK
ZIP:74361
Country:US
Phone:918-825-5744
CAGE:23577

=============  Composition/Information on Ingredients  =============

Ingred Name:SILICA, AMORPHOUS FUMED; (SILICA (AS AMORPHOUS SILICA,
    TOTAL DUST))
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: 11%
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

Ingred Name:ETHYLTRIACETOXYSILANE
CAS:17689-77-9
Fraction by Wt: 2%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SILANE, METHYLTRIACETOXY-; (METHYLTRIACETOXYSILANE)
CAS:4253-34-3
RTECS #:VV4500000
Fraction by Wt: 2%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE) (IN WHITE PRODUCT ONLY)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 2%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Ingred Name:NON-HAZARDOUS INGREDIENTS
Fraction by Wt: >75%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE, NOSE AND THROAT IRRITATION.
    POSSIBLE SKIN IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: IMMED FLUSH EYES W/LARGE AMOUNTS OF WATER FOR AT LEAST
    15 MINUTES WHILE HOLDING EYELIDS OPEN. GET MEDICAL ATTENTION IF
    IRRITATION PERSISTS. SKIN: WIPE MATL FROM SKIN W/CLOTH OR PAPER
    TOWEL, THEN  WASH EXPOSED AREA W/SOAP & WATER. GET MEDICAL HELP IF
    IRRITATION PERSISTS. INHAL: MOVE TO FRESH AIR. GET MEDICAL HELP IF
    IRRITATION PERSISTS. INGEST: CONTACT LOCAL POISON CONTROL CENTER OR
    MD IMMED!

=====================  Fire Fighting Measures  =====================

Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE OR FOAM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . NO SPECIAL PROCEDURES REQUIRED.
Unusual Fire/Explosion Hazard:NONE KNOWN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR PERSONAL PROTECTIVE EQUIPMENT. CLEAN UP
    WITH ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A CLOSED CONTAINER IN DRY
    AREA.
Other Precautions:DO NOT WEAR CONTACT LENSES WHILE APPLYING THIS
    MATERIAL AS ACETIC ACID VAPOR MAY BECOME TRAPPED UNDER LENSES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY REQUIRED. IF TLV IS EXCEEDED OR FOR
    SYMPTOMS OF OVEREXPOSURE, WEAR NIOSH APPROVED RESPIRATOR FOR
    ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST MAY BE NECESSARY UNDER SOME HANDLING/USE
    CONDITIONS.
Protective Gloves:NEOPRENE OR OTHER CHEM RESIST GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Vapor Density:>1
Spec Gravity:>1 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:THICK LIQUID; SLIGHT VINEGAR ODOR.
Percent Volatiles by Volume:<5

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MOISTURE WILL RELEASE ACETIC ACID VAPOR.
Stability Condition to Avoid:AVOID EXTREME HEAT.
Hazardous Decomposition Products:SILICON DIOXIDE, CARBON MONOXIDE,
    CARBON DIOXIDE, TRACES OF FORMALDEHYDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE ACCORDING TO LOCAL, STATE AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.