ALFA AESAR (A JOHNSON MATTHEY CO) -- SILVER WIRE, 11434 -- 9545-00-904-8535
=====================  Product Identification  =====================

Product ID:SILVER WIRE, 11434
MSDS Date:12/07/1995
FSC:9545
NIIN:00-904-8535
=== Responsible Party ===
Company Name:ALFA AESAR (A JOHNSON MATTHEY CO)
Address:30 BOND ST
City:WARD HILL
State:MA
ZIP:01835-0747
Country:US
Info Phone Num:978-521-6300
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:MO202
=== Contractor Identification ===
Company Name:ALFA AESAR (A JOHNSON MATTHEY CO)
Address:30 BOND ST
Box:City:WARD HILL
State:MA
ZIP:01835-0747
Country:US
Phone:978-521-6300
CAGE:MO202
Company Name:JOHNSON MATTHEY CATALOG CO INC ALFA AESAR
Address:30 BOND ST
Box:City:WARD HILL
State:MA
ZIP:01835-0747
Country:US
Phone:978-521-6300
CAGE:0JVJ1

=============  Composition/Information on Ingredients  =============

Ingred Name:SILVER (SARA 313) (CERCLA)
CAS:7440-22-4
RTECS #:VW3500000
Fraction by Wt: 100%
OSHA PEL:0.01 MG/M3
ACGIH TLV:0.1 MG/M3
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:SUP DAT: SILVER MAY REACT WITH ACETYLENE, ACETYLENE
    COMPOUNDS OR AMMONIA TO FORM SHOCK SENSITIVE SOLIDS.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: MAY CAUSE ARGYRIA.
    SKIN: NONE KNOWN. EYES: POWDER/DUST MAY CAUSE IRRIT. INHAL:
    POWDER/DUST MAY CAUSE IRRIT, PIGMENTATION OF NASAL SEPTUM & MILD
    BRONCH. CHRONIC: ABSORPTION OF SILVER CMP DS BY INGEST, INHAL/THRU
    SKIN CAN CAUSEARGYRIA, A PERMANENT BLUISH-GREY DISCOLORATION OF
    SKIN, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CONJUNCTIVA & MUC MEMBS. GENERALIZED
    ARGYRIA DEVELOPS AFTER 2-25 YRS OF EXPOS. THERE ARE NO SYSTEMIC
    EFTS/SYMPS & NO PHYSICAL DISABILITY. SILVER IS CONSIDERED AN
    EXPERIMENTAL EQUIVOCAL TUMOR IGENIC AGENT BY RTECS CRITERIA.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:INGESTION: OBTAIN MEDICAL ATTENTION. SKIN: REMOVE
    CONTAMINATED CLOTHING, FLOOD SKIN WITH LARGE AMOUNTS OF WATER. IF
    IRRITATION PERSISTS SEEK MEDICAL ATTENTION. EYES: IMMEDIATELY
    FLUSH, INCLUDING UNDER  EYELIDS, WITH LARGE AMOUNTS OF WATER FOR AT
    LEAST 15 MINUTES. CALL MD. INHALATION: OBTAIN MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:IF METAL IS BURNING USE DRY CHEMICAL, DRY SAND OR
    DRY GROUND DOLOMITE. ONLY POWDER FORMS ARE LIKELY TO BE FIRE
    HAZARD.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . NO SPECIAL FIREFIGHTING PROCEDURES NEEDED. IF WITHOUT
    RISK, REMOVE MATERIAL FROM FIRE AREA.
Unusual Fire/Explosion Hazard:ONLY POWDER FORMS ARE LIKELY TO BE FIRE
    HAZARD.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEARING FULL PROTECTIVE EQUIPMENT, COVER SPILL
    WITH DRY SAND OR VERMICULITE. MIX WELL AND CAREFULLY TRANSFER TO A
    CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE
    IN A COOL, DRY, WELL-VENTILATED AREA.
Other Precautions:NOT KNOWN TO BE HAZARDOUS IN SOLID FORM.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:FOR FINE POWDER NIOSH APPROVED DUST MASK
    RESPIRATOR.
Ventilation:LABORATORY FUME HOOD. FOR FINE POWDERS USE A GLOVE BAG OR
    BOX WITH DRY INERT ATMOSPHERE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYEWASH & DELUGE
    SHOWER . WEAR LAB COAT, FLAME & CHEMICAL RESISTANT COVERALLS.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE.
Supplemental Safety and Health
MATLS TO AVOID: ETHANOL + NITRIC ACID, ETHYLENE OXIDE, ETHYL
    HYDROPEROXIDE, IODOFORM, OZONIDES, PEROXOMONOSULFURIC ACID,
    PEROXYFORMIC ACID.	 SILVER MAY REACT WITH ACETYLENE, ACETYLENE
    COMPOUNDS OR AM MONIA TO FORM SHOCK SENSITIVE SOLIDS.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:4010F,2210C
Melt/Freeze Pt:M.P/F.P Text:1761F,961C
Vapor Pres:0
Vapor Density:10.49
Spec Gravity:10.491 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:SOFT, DUCTILE, LUSTROUS WHITE METAL WITH NO ODOR.
Percent Volatiles by Volume:0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACETYLENE, ACETYLENE CMPDS, AMMONIA, BROMOAZIDE, CHLORINE TRIFLUORIDE,
    ETHYLENE IMINE, HYDROGEN PEROXIDE, OXALIC ACID, TARTARIC ACID,
    MINERAL ACIDS, OXIDIZERS, 3-BROMEPROPYNE, CARBOXYLIC ACIDS, COPPER
    + ETHYLENE GLYCOL, ELE
Stability Condition to Avoid:HEAT, SPARKS, AND FLAME FOR POWDER.
Hazardous Decomposition Products:SILVER OXIDES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONSULT STATE, LOCAL OR FEDERAL EPA REGULATIONS
    FOR PROPER DISPOSAL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.